Pre-cutting disc-type gear shaper cutter with DIN 3972/III
2021-10-18 11:51:13
jiangxingTools
3265
Pre-cutting disc-type gear shaper cutter with DIN 3972/III
Tooth profile is according to DIN3972-3 standard
Module: m1-m6
Number of teeth: Z20-124
Pressure angle: 20°
Bore: 44.443mm
The standard gear shaping tools are manufactured from HSS M35, ASP2052 / S390 material with an Alcrona Pro coating. Here you will find the available models in the category disc-type shaper cutters DIN 3972/III. The stock shaper tools are available within a short space of time, and include a measurement.
相關文章
-
PA20° Standard Involute Gear Milling Cutter with Module m3.5
PA20° Standard Involute Gear Milling Cutter with Module m3.5Module: m3.5, pressre angle: 20°Dimensio... - Timing Pulley Hob for S.T.D XH(22.225)
- PA20° Pre-shaving Gear Hob Cutter with Module m1.75
- Module, DP and CP for Spur Gear Hobs
- PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m1.25
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m2
- PA20° Pre-shaving Hob Cutter with Module m3.25
