The Method of Hob Computation
2021-08-26 13:43:54
jiangxingTools
2703
The Method of Hob Computation
Normal pitch=Mn x Π（Mn: Normal Module)
Axial pitch=Mn/cos LA
Lead=Axial pitch x Number of start
LA(Lead Angle)=sin-1(Mn x Number of start/Hob PCD)
Cam amount(relief amount)=Hob OD x Π x tan(cam angle)/Hob NT
Cam angle: Generally PA20°-10°， 14.5°-12°，25°-9°
Groove Lead=Hob PCD x Π/tan LA
Flute depth= Total tooth height if a hob+ Cam amount+1.5mm
Hob's Relief Angle=tan-1(tan PA x tan Cam angle)
相關文章
-
PA20° Inserted Blade Gear Hob with Module m24
PA20° Inserted Blade Gear Hob with Module m24Material：HSS M2, M35Tooth profile is according to DIN39... - PA20° Module m6.5 Standard Involute Gear Cutter Hob
- Hub-type gear shaper cutter with DIN 5480
- Rectangle Spline Hob
- Shank Type Worm Wheel Hob with Module m3
- Hob for roller chain sprocket
- PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m5
