Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
1956
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
Processing Steps for Carbide Gear Hobs
Processing Steps for Carbide Gear HobsChongqing Jiangxing Tools is supplying carbide gear hobs with... - PA20° Standard Involute Gear Milling Cutter with Module m0.8
- PM-HSS ASP2052 for Shaper Cutter and Gear Hob Cutter
- HSS M2, M35, ASP30, ASP52, S390 Disk Type Gear Shaper Cutter with DIN3972 Profile
- GB STD Disk Type Straight Tooth Gear Shaper Cutter
- Disk Type Shaper Cutters with GB 6081
- TIN Coated HSS M2, M35, ASP30, S390 Ground Form Relieved Gear Hob with m1-m10
