Bohler S705 for Gear Hobs and Cutters
2022-08-19 13:58:18
jiangxingTools
1953
Bohler S705 for Gear Hobs and Cutters
Material composition of S705: C-0.92, Cr-4.10, Mo-5, V-1.9, W-6.20, Co-4.80
Standard: 1.3243, HS6-5-2-5, EN ISO 4957
Performance feature of Gear Hobs and Cutters with S705:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
HSS M2, M35, M42 Material Gear Shaper Cutter with PVD Coating TiN, AP
HSS M2, M35, M42 Material Gear Shaper Cutter with PVD Coating TiN, APModule range: m1-m16, DP1.5-DP5... - RS35 Roller Chain Sprocket Hob with Pitch 9.525 x Roller Dia. 6.35
- PA20° DP3.5 Standard Gear Hob Cutter with BPⅡ
- PA20° Pre-shaving Gear Hobber with Module m2.5
- PA30° DIN5480 Involute Spline Gear Hob with Module m8
- PA20° Inserted Blade Gear Hob with Module m22
- Gear hobs for synchroflex timing belt pulleys
