Bohler S590 Microclean for Hobs
2022-08-19 11:55:41
jiangxingTools
1857
Bohler S590 Microclean for Hobs
Material composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30, Co-8.40
Standard: 1.3244, HS6-5-3-8, EN ISO 4957
Performance feature of Gear Hobs with S590:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: high
Edge Stability: high
Grindability: high
Hot Hardness (red hardness): high
相關(guān)文章
-
PA20° PCD 100mm Disk Type Gear Shaper Cutter with Module m1~m6
PA20° PCD 100mm Disk Type Gear Shaper Cutter with Module m1~m6Material：HSS M2,M35, M42, S390Module：m... - PA20° Module m4.5 Standard Involute Hob
- Bore Gear Hob
- PA20° Profile DIN3972 Standard Gear Hobbing Cutter with Module m4.25
- Powder Metallurgy HSS ASP 2030
- RS100 Roller Chain Sprocket Hob with Pitch 31.75 x Roller Dia. 19.05
- PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m2.5
