Tip Chip Thickness for Hobs
2022-02-09 09:16:09
jiangxingTools
2094
Tip Chip Thickness for Hobs
The tip chip thickness is an important criterion for hob design and optimization. the tip chip thickness is the theoretical maximum chip thickness which can be removed by the tooth tips of the hob.
The following hob characteristics and cutting parameters are taken into account during calculation of the tip chip thickness:
1), module
2), number of teeth
3), helix angle
4), profile displacement
5), cutter diameter
6), number of gashes
7), number of starts
8), axial feed
9), cutting depth
Any more information on module and dp gear hobs, please visit our website.
相關文章
-
Module, DP and CP for Spur Gear Hobs
Module, DP and CP for Spur Gear HobsIn most English-speaking countries, diametral pitch and circular... - PA20° DP3.5 Standard Gear Hob Cutter with BPⅡ
- PA20° Standard Gear Milling Cutter with Module m8
- PA20° Standard Gear Milling Cutter with Module m1.5
- PA30° DIN5480 Involute Spline Gear Hob with Module m3.5
- Timing Pulley Hob for HTD 3M
- PA20° Profile DIN3972 Standard Gear Hob Cutter with Module m4.5
