Description of Gear Hobbing Workpiece
2021-12-16 08:51:59
jiangxingTools
2783
Description of Gear Hobbing Workpiece
1) Module
2) Pressure angle
3) Helix angle
4) Number of teeth
5) Tip diameter
6) Root diameter or toot height
7) Profile displacement factor or standards for setting the tooth thickness
8) Gear width
9) Material and tensile strength
10) Number of workpiece to be machined, lot size, if applicable
相關文章
-
PA20° Profile DIN3972 Standard Pre-grinding Gear Hobber Cutter with Module m2.5
PA20° Profile DIN3972 Standard Pre-grinding Gear Hobber Cutter with Module m2.5Tooh profile is accor... - PA30° PCD 125mm Deep Counterbore-Type Gear Shaper Cutter with Module m8~m10
- S390, ASP52, M42, M35, M2 Chain Sprocket Hobs
- PA20° DP3 Standard Gear Hob with BPⅡ
- Involute Spline Gear Hob with DIN 5482
- Broaches
- Nominal PCD 180mm M2.25 Gear Shaving Cutter with PA20°
